Warning: Last items in stock!
|Ridge height||Standard version: 3.95 m|
Heightened version: 4.75 m
|Gutter height||2.15 m|
|Crop stand height||2.80 m|
|Gap between hoops||2.50 m|
|Poles||2.50 m gap around and 5 m gap inside the structure|
|Length||From 10 m up to 200 m (2.50 m gap between hoops)|
|Poles||100 x 50 x 2 mm to concrete|
|Hoops||90/50 x 1.5 mm oval galvanized steel tubes|
|Ridge struts||1 x Ø 32 mm on ridge, one row + 4 x 2.50 m struts in the corners|
|Gutters||2 x magnelis gutter rows (length 270 mm)|
|Reinforcements||6 reinforcements on gable hoops|
2 gable reinforcements
2 x St-Andrew's crosses on each row of poles (Ø32 mm tube)
Over 60 metres: extra reinforcements through 2 x St-Andrew's crosses and 4 extra reinforcements.
|Crop stands||Ø32 mm - reinforced|
|Pole head fixation||Possible twinning|
|Ground fixation||Plates to concrete|
|Lift gable with 1.95 m x 1.20 m door|
|Closed polycarbonate gable, etc.|
|Simple side or double inflatable side||200 µ thermal film with anti-UV protection|
Fixation system thanks to a metal profile and two PVC rods: easy mounting, very sturdy system against weather conditions
Several types of films are offered: Luminance, Luminal, nursery film...
|Polycarbonate||Polycarbonate sheets: compact and very sturdy products with optimal light transmission|
|Rolling-up side ventilation||Ventilation sides are operated through a rolling-up system, guided by a steel tube (every 5 m).|
Side ventilations have windbreak features, reducing wind speed and flow and ensuring a perfect insulation when the system is closed.
The film is rolled up around a metal tube and fixed using clips. The ventilation is operated manually through a manual reducer + a telescopic arm. Side flaps are included.
• Ø 32 mm x 2 rolling-up side ventilation. Galvanized steel with manual reducer and telescopic arm
• Ø 32 mm x 2 rolling-up side ventilation. Galvanized, operated by an engine.
Double inflatable wall
|1.50 m ridge ventilation to fine-tune ventilation|
Automated climate control
Collection and use of rainwater (collect / store / spread / water)
Structure calculations and standards
The structure was checked in accordance with Structural Eurocodes. This Eurocode sets standard for building works, metting the criteria of the european Directive on Construction Products.
It encompasses operations, control, to indicate the quality of products and the required technical demands necessary to comply with the standard of the project.
Used standards are the following:
|UNE-ENV 1991-2-4- Eurocode 1||Project info and actions on structures|
|CTE DB SE-AE||Structural safety requirements. Actions while building|
|UNE-ENV 1993-1-1- Eurocode3||Steel structures projects|
12 other products in the same category: